Start of the sale:
Saturday, May 29, 2010 at 10:05 AM
Item n°92706407
Sale ends:
Friday, September 27, 2024 at 3:18 PM
Erscheinungsdatum: 14.06 2010
Auflagenhöhe: 900.000
Druckart: Offset
Entwurf: Silvia Moucka
Druck: Joh. Enschedé Stamps B. V.
Art: Sonderpostmarke
Zustand: ***
Die Wiener Wasserversorgung wird im Wesentlichen durch zwei Hochquellenleitungen gewährleistet; insgesamt können damit fast 590.000 m³ Trinkwasser pro Tag in die Bundeshauptstadt geleitet werden.
Bereits zur Zeit der Römer versorgte eine mehrere Kilometer lange Wasserleitung das einstige Vindobona – damals wurde das Wasser (etwa 5.000 m³ täglich) aus dem Gebiet des heutigen Perchtoldsdorf und Gumpoldskirchen bezogen. Im 17. Jahrhundert versorgte der Brunnen am Neuen Markt die ersten Stadtteile mittels einiger kleinerer Wasserleitungen mit Frischwasser; dies blieb bis weit ins 19. Jahrhundert hinein das einzige Wasserleitungssystem innerhalb Wiens. Zwischen 1835 und 1841 schließlich wurde das erste flächendeckende städtische Wasserleitungssystem gebaut: die Kaiser-Ferdinands-Wasserleitung, durch die täglich 20.000 m³ filtriertes Donauwasser floss. Das Wachstum der Stadt überforderte dieses System jedoch recht bald – und als im Jahre 1861 bereits die siebenfache Menge dessen, was jene Wasserleitung lieferte, notwendig war, kam es zu einer öffentlichen Ausschreibung für ein neues Wasserversorgungssystem. Es gewann das Projekt der Geologen Eduard Suess und Carl Junker, das eine 120 Kilometer lange Fernleitung, Wasserspeicher sowie ein Verteilungssystem beinhaltete. Durch die rasante Stadtentwicklung wurde die I. Hochquellenleitung, die seit 1873 in Betrieb war, aber ebenfalls bald zu schwach. Anfang des 20. Jahrhunderts wurde daher unter Bürgermeister Karl Lueger die II. Wiener Hochquellenleitung errichtet, und 1910 – also vor genau 100 Jahren – von Kaiser Franz Joseph eröffnet. Diese Wasserleitung wird von Quellen im Hochschwabgebiet gespeist. Sie hat ausreichend Gefälle bis Wien, sodass keine zusätzlichen Pumpen benötigt werden. Wie bei der I. Hochquellenleitung sind bereits im Quellgebiet große Höhenunterschiede vorhanden. Dieser Druck wird in Turbinen als Druckbremse abgebaut, die die Umgebung von Wildalpen bis Mariazell mit Strom versorgen – eines der bekanntesten dieser Kraftwerke ist jenes in Gaming. Die 200 Kilometer lange Leitung, die großteils aus Stein gemauerten Stollen besteht, führt über 100 Aquädukte und 19 Düker, welche aus Gussrohrleitungen errichtet wurden, da sie stellenweise bis 9 bar standhalten müssen. Das Wasser benötigt etwa 36 Stunden für die Strecke bis nach Wien. Im Bereich größerer Flüsse sind Ablassschleusen eingebaut, die ein Entleeren der Leitung für Wartungs- und Reinigungsarbeiten ermöglichen. Die größte Quelle ist die Kläfferquelle am Fuß des Hochschwabs im steirischen Salzatal, die bei Schneeschmelze eine Schüttung von rund 10.000 Liter pro Sekunde hat und damit zu den größten Trinkwasserquellen Europas zählt. Der Verlauf der Leitung führt von Wildalpen und Lunz am See über Scheibbs, Wilhelmsburg, Neulengbach und Preßbaum bis nach Wien.
Die Zweite Hochquellenleitung wird von Quellen im Hochschwabgebiet gespeist. Sie wurde 1910, ebenfalls von Kaiser Franz Joseph, eröffnet. Auch sie hat ausreichend Gefälle bis Wien, sodass keine Pumpen benötigt werden. Wie bei der ersten Hochquellenleitung sind bereits im Quellgebiet große Höhenunterschiede vorhanden. Dieser Druck wird in Turbinen als Druckbremse abgebaut, die die Umgebung von Wildalpen bis Mariazell mit Strom versorgen. Eines der bekanntesten dieser Kraftwerke ist das Wasserleitungskraftwerk Gaming. Die 200 km lange Leitung, die großteils mit Steinen gemauerten Stollen besteht, führt über 100 Aquädukte und 19 Düker, die aus Gussrohrleitungen errichtet wurden, da sie stellenweise bis 9 bar aushalten müssen. Das Wasser benötigt ungefähr 36 Stunden für die Strecke aus dem Quellengebiet bis Wien. Auch bei der Zuleitung in den Hochbehälter in Lainz ist der Druck des Zulaufes so stark, dass dort ebenfalls eine Turbine eingebaut wurde, welche jetzt wieder zur Energiegewinnung reaktiviert werden soll. Im Bereich größerer Flüsse sind Ablassschleusen eingebaut, die ein Entleeren der Leitung für Wartungs- und Reinigungsarbeiten, der sogenannten Abkehr ermöglichen.
Die größte der Quellen ist die Kläfferquelle am Fuß des Hochschwabs im steirischen Salzatal, die bei Schneeschmelze eine Schüttung von 10.000 l/s hat (das sind ca. 860.000 m³ oder 860 Mio. Liter pro Tag) und damit zu den größten Trinkwasserquellen Europas zählt. Allerdings hat die Leitung nur ein Fassungsvermögen von 210.000 m³ täglich bei einem durchschnittlichen Leitungsquerschnitt von 1,16 bis 1,92 m Breite und 1,58 bis 2,08 m Höhe.
Der Verlauf der Leitung führt von Wildalpen, Lunz am See, Scheibbs, Wilhelmsburg und Neulengbach über Preßbaum nach Wien.
Der größte Teil des Quellengebietes gehört der Gemeinde Wien, die es vom Stift Admont gekauft hatte.
Vienna, water pipeline, health, clear water
See more